Hirschmann PRS 80, Руководство оператора и сервисное руководство

Страница: 10 / 48

Operator’s Manual PRS 80 10
Button "C"
•
Generally used to back out of a selection and return to the previous
screen.
•
While pushing this button, the control lever lockout function of the
system can be deactivated.
•
Accesses the Tare function
Since button C can deactivate the lockout function of the system, the following instructions
must be obeyed:
•
The by-pass function shall be used with discretion, as unwarranted use of it to override
the control lever lockout system can result in harm to the crane and danger to property
and persons.
•
Never use the by-pass function to either overload or operate the crane in a non-
permissible range.
5 SYSTEM OPERATION
Upon switching on crane ignition switch, the system starts with an automatic test of the system, of
lamps and audible alarm. During the test, the LC display shows the console and system software
version.
The TR setup procedure allows the operator to input the sensors being used and the limits for the
sensors. The operator must complete the setup procedure for each sensor.
On several screens, icons are used to represent the sensor. Here are the icons used in the system.
First installed A2B switch
Second installed A2B switch Load sensor
Wind Speed Sensor Reeving #
© Hirschmann PRS80 REV. C 09/26/05 190183_D.DOC