Hirschmann PowerMICE MB-2T, Руководство пользователя

Страница: 40 / 58

40
PowerMICE
Release 01 04/2014
2.4 Basic set-up
The IP parameters must be entered when the device is installed for the first
time. The device provides 6 options for configuring IP addresses:
 Entry via V.24 connection

Entry using the HiDiscovery protocol via the application HiDiscovery or
Industrial HiVision
 Configuration via BOOTP

Configuration via DHCP
 Configuration via DHCP Option 82

Auto Configuration Adapter
Further information on the basic settings of the device can be found in the
“Basic Configuration” user manual on the CD ROM.

Default settings

IP address: The device looks for the IP address using DHCP
 Password for management:
Login: user; password: public (read only)
Login: admin; password: private (read and write)
 V.24 data rate: 9,600 Baud

Ring redundancy: deactivated
 Ethernet ports: link status is not evaluated (signal contact)

Optical 100 Mbit/s ports: 100 Mbit/s, full duplex
All other ports: autonegotiation
 Ring manager disabled

Stand-by coupling: disabled
 The configuration is controlled via the software

USB interface
The USB socket has an interface for the local connection of an
AutoConfiguration Adapter ACA 21-USB. It is used for saving/loading the
configuration and for updating the software.

V.24 interface (external management)
The V.24 interface is an RJ11 socket.
Contact number Signal name
1 VCC
2 - Data
3 + Data
4 Ground