Hirschmann PowerMICE MB-2T, Руководство пользователя

Страница: 24 / 58

24
PowerMICE
Release 01 04/2014
2 Assembly and start-up
Before installing and starting up the device, note the safety instructions (see
page 5 onwards).
2.1 Overview of installation
Two or more devices configured with the same IP address can cause
unpredictable operation of your network.
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
The following steps should be performed to install and configure a Switch:

Unpacking and checking
 Installing the media modules
 Filling out and attaching labels

Installing the SFP modules
 Adjusting DIP switch settings on basic module

Adjusting the DIP switch settings on the MM20-A8A89999SAHH media
module
 Connecting the MM22-T1T1T1T1 PoE media module

Connecting the terminal blocks for supply voltage and signal contact
 Installing the terminal blocks; start-up procedure

Installing the device on the DIN rail, grounding
 Connecting the data lines
 Installing the MB-2T expansion module
WARNING
UNINTENTIONAL OPERATION IN DEVICE
Install and maintain a process that assigns a unique IP address to every
device in the network.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.