Hirschmann Octopus II, Руководство пользователя

Страница: 41 / 66

Installation Octopus II
Release 06 10/2018
41
2.4.6 Supply voltage with the characteristic value QQ
A 4-pin, “T”-coded M12 power plug is available for the redundant supply of
the device.
You find the prescribed tightening torque in chapter:
See “Technical data” on page 49.
Note: For applications in trains only use shielded power supply cables if the
German Regelung Nr. EMV 06 (Regulation No. EMC 06) for electromagnetic
compatibility of railway vehicles with railway radio services is to be applied.
The provided M12 Power plug allows you to connect shielded power supply
cables.
The supply voltage is connected to the device casing through protective
elements exclusively.
You have the option of supplying the supply voltage redundantly, without
load distribution.
With a non-redundant supply of the supply voltage, the device reports the
loss of a supply voltage. You can prevent this message by changing the
configuration in the Management.

Connect the electrical wires to the socket according to the pin
assignment.
2.4.7 Supply voltage with the characteristic value PP
Note: Exclusively use a PoE power supply unit with galvanic isolation.
Hirschmann has tested the power supply unit PC150/110V/54V and
recommends its use. You find the order number for the power supply unit,
which is available as accessory, under:
“Accessories” on page 62
A 4-pin, “T”-coded M12 power plug is available for the redundant supply of
the device.
You find the prescribed tightening torque in chapter:
See “Technical data” on page 49.
Type and specification of the
supply voltage Pin assignment
Rated voltage range
24 V DC ... 48 V DC P1+ Plus terminal of supply
voltage 1
Voltage range incl. maximum
tolerances
16.8 V DC ... 60 V DC P1 − Minus terminal of supply
voltage 1
P2 − Minus terminal of supply
voltage 2
P2+ Plus terminal of supply
voltage 2
P2
-
P1+
P2+
P1
-