manualshive.com logo in svg

Hirschmann MACH 4000 Series, Руководство пользователя

Поделиться
Скачать
Hirschmann MACH 4000 Series Скачать руководство пользователя страница 91

Protection from unauthorized access

Basic - L3P

Release 3.1 06/07

6.6 Access Control Lists (ACL)

91

The sequence used in defining the rules of a list, and the sequence in which 
these lists are attached to an interface, determines the sequence in which the 
rules and lists are used (see 

“Specifying the sequence of the rules” on page 

100

).

Note: 

 

With Power MICE and MACH 4000, you can use either MAC-based or 

 

IP-based ACLs for each interface.

 

With MACH 4002-24G/48G, you can use both MAC-based and IP-based 
ACLs for each interface.

6.6.1 Description of IP-based ACLs

The switch decides between standard and extended IP-based ACLs. 
ACLs with an ID number (ACL ID)

D

1 to 99 are standard IP-based ACLs and

D

100 to 199 are extended IP-based ACLs.

Standard IP-based ACLs provide the following criteria for filtering:

D

IP source address with network mask

D

All data packets (match every)

Extended IP-based ACLs provide the following criteria for filtering:

D

All data packets (every)

D

Protocol number or protocol (IP, ICMP, IGMP, TCP, UDP)

D

IP source address with network mask or all IP source addresses (any)

D

Layer 4 protocol number of the source (UDP port, TCP port)

D

IP destination address with network mask or all IP destination 
addresses (any)

D

Layer 4 protocol number of the destination (UDP port, TCP port)

D

TOS field with mask

D

DSCP field

D

IP precedence field

Содержание MACH 4000 Series













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды