manualshive.com logo in svg

Hirschmann MACH 4000 Series, Руководство пользователя

Поделиться
Скачать
Hirschmann MACH 4000 Series Скачать руководство пользователя страница 129

Traffic control

Basic - L3P

Release 3.1 06/07

8.2 Multicast application

129

8.2.4 Description GMRP

The 

G

ARP 

M

ulticast 

R

egistration 

P

rotocol (GMRP) describes the distribution 

of data packets with a multicast address as the target address on layer 2. 
Devices that want to receive data packets with a multicast address as the 
target address carry out the registration of the multicast address with the aid 
of the GMRP. For a Switch, registration involves entering the multicast 
address in the filter table. When a multicast address is entered in the filter 
table, the Switch sends this information in a GMRP packet to all the ports. 
Therefore the connected Switches know that they have to send this multicast 
address to this Switch. The GMRP enables packets with a multicast address 
in the target address field to be sent to the ports entered. The other ports are 
not affected by these packets. 
Data packets with unregistered multicast addresses are transmitted to all 
ports by the Switch.

Default setting: “Global Configuration”: disabled.

8.2.5 Setting multicast applications 

V

Select the 

Switching:Multicasts

 dialog.

 

U

Global Configuration

With “IGMP Snooping” check box you can switch IGMP Snooping 
on/off globally for the entire Switch. If IGMP Snooping is switched 
off, then:

D

the Switch does not evaluate Query and Report packets received

 

and

D

it sends (floods) received data packets with a Multicast address as 
the target address to all ports.

Содержание MACH 4000 Series













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды