manualshive.com logo in svg

Hirschmann MACH 4000 Series, Руководство пользователя

Поделиться
Скачать
Hirschmann MACH 4000 Series Скачать руководство пользователя страница 184

Operation Diagnostics

184

9.8 Topology discovery

Basic - L3P

Release 3.1 06/07

9.8 Topology discovery

9.8.1 Description Topology discovery

IEEE 802.1AB describes the Link Layer Discovery Protocol (LLDP). 

 

LLDP allows users to automatically detect the topology of their LANs.

A device with active LLDP

D

sends its own connection and management information to neighboring 
devices of the shared LAN, in as far as they have also LLDP activated.

D

receives connection and management information from neighboring de-
vices of the shared LAN, in as far as they have also LLDP activated.

D

sets up a management information scheme and object definitions for 
saving connection information of neighboring devices that have LLDP 
activated.

The connection information contains as its most significant element the 
precise and unique ID of a connection endpoint: MSAP (MAC Service 
Access Point). This is composed of the MAC address of the device and a 
port  ID that is unique to this device. 

 

Contents of the connection and management information:

D

Chassis ID (its MAC address)

D

Port ID (its port MAC address)

D

Description of the port

D

System name

D

System description

D

Supported “system capabilities” (e.g. router = 14 or switch = 4)

D

Currently activated “system capabilities”

D

Interface ID of the management address

D

VLAN-ID of the port

D

Status of autonegotiation on the port

D

Medium, half/full duplex setting and transmission speed setting of the port

D

Information about the redundancy protocol (STP, RSTP, HIPER-Ring, 
ring coupling, dual homing) which is activated at this port.

D

VLAN information concerning the port (VLAN ID and VLAN name).

Содержание MACH 4000 Series













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды