manualshive.com logo in svg

Hirschmann MACH 4000 Series, Руководство пользователя

Поделиться
Скачать
Hirschmann MACH 4000 Series Скачать руководство пользователя страница 130

Traffic control

130

8.2 Multicast application

Basic - L3P

Release 3.1 06/07

U

IGMP Querier

With “IGMP Querier active” you can switch the Query function on/
off. 

 

The Protocol check boxes allow you to select IGMP version 1, 2 or 
version 3.

U

Unknown Multicasts

"Send to Query Ports", the Switch sends the packets with an 
unknown MAC/IP multicast address to all query ports.
"Send to All Ports", the Switch sends the packets with an unknown 
MAC/IP multicast address to all ports.
"Discard", the Switch discards all packets with an unknown MAC/IP 
multicast address. 

Note: 

The way in which unlearned multicast addresses are handled 

also applies to the reserved addresses from the "Local Network Con-
trol Block" (224.0.0.0 - 224.0.0.255). This can have an effect on the 
higher-level routing protocol.

U

IGMP on per port

This table column enables you to switch on/off the IGMP for each 
port when the global IGMP Snooping is switched on. When you 
switch off the IGMP at a port, no registrations can be made for this 
port.

U

IGMP Forward All per port

This column of the table allows you to switch on/off the IGMP Snoo-
ping function “Forward All” when the global IGMP Snooping is swit-
ched on. With the “Forward All” setting, the Switch forwards all the 
data packets with a Multicast address in the target address field to 
this port.

Note: 

If a number of routers are connected to a subnetwork, then you 

must use IGMP version 1, so that all the routers receive all the IGMP 
reports.

Note: 

If you use IGMP version 1 in a subnetwork, then you must also 

use IGMP version 1 in the entire network.

Содержание MACH 4000 Series













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды