manualshive.com logo in svg

Hirschmann MACH 1040 Series, Руководство пользователя

Поделиться
Скачать
Hirschmann MACH 1040 Series Скачать руководство пользователя страница 24

Ring Redundancy

24

2.2 Example of an MRP-Ring

Redundancy

Release 6.0 07/2010

Note: 

For all devices in an MRP-Ring, activate the MRP compatibility in the 

Rapid Spanning Tree:Global

 dialog if you want to use RSTP in the 

MRP-Ring. If this is not possible, perhaps because individual devices do not 
support the MRP compatibility, you deactivate the Spanning Tree protocol at 
the ports connected to the MRP-Ring. Spanning Tree and Ring Redundancy 
affect each other.

Note: 

When you are configuring an MRP-Ring using the Command Line 

Interface, you define an additional parameter. When configured using CLI, an 
MRP-Ring is addressed via its MRP domain ID. The MRP domain ID is a 
sequence of 16 number blocks (8-bit values). Use the default domain of 255 
255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 for the MRP 
domain ID. 

 

This default domain is also used internally for a configuration via the Web-
based interface. 

 

Configure all the devices within an MRP-Ring with the same MRP domain ID.

The displays in the “Information” frame mean
– “Redundancy existing”: One of the lines affected by the function may 

be interrupted, with the redundant line then taking over the function 
of the interrupted line.

– "Configuration failure”: The function is incorrectly configured or the 

cable connections at the ring ports are improperly configured (e.g., 
not plugged into the ring ports).

enable

Switch to the Privileged EXEC mode.

configure

Switch to the Configuration mode.

mrp new-domain 

 

  default-domain

Create a new MRP-Ring with the default domain 
ID 

 

255.255.255.255.255.255.255.255.255.255.255.
255.255.255.255.255

MRP domain created:

 

Domain ID: 
255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255

 

  (Default MRP domain)
mrp current-domain 

 

  port primary 1/1

Define port 1 in module 1 as ring port 1 (primary).

Содержание MACH 1040 Series















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды