Hirschmann EAGLE 20 Series, Справочное руководство

Страница: 31 / 40

CLI EAGLE 20
Release 5.0 08/2010
31
4 Examples
4.1 Change timeout default setting
„
Task assignment
The following example shows how you find and execute a command for
changing the default setting of the timeout value for your SSH connection.
On delivery, this value is set to 5 minutes. This means that after this time
has elapsed, the CLI logs off the user if no keys have been pressed. You
can set a value for this timeout in the range from 1 to 120 minutes.
„
Login to CLI
Login to CLI as described above (see on page 10 „Preparing the con-
nection“ ) .
„
Finding the command mode
You are in the User Exec mode (see on page 17 „Mode-based command
hierarchy“ ) .
Enter a question mark “?” to get a list of the commands available in this
mode
(see fig. 9) .
The corresponding command is located in a different mode. The
Privileged Exec mode provides a wider range of commands.
To switch to the Privileged Exec mode quickly and easily, you enter
“en” and a space. The CLI completes the command to “enable”
(see
on page 27 „Data entry elements“ ) . Execute the command with <En-
ter>. The command prompt changes from
(Hirschmann Eagle)>
to
(Hirschmann Eagle)#
, thus informing you that you are now in
the Privileged Exec mode.
Enter a question mark “?” to get a list of the commands available in this
mode
(see fig. 10) .
The “login” command is used to perform this task.
!*(Hirschmann Eagle) >enable
!*(Hirschmann Eagle) #