Hirschmann EAGLE 20 Series, Справочное руководство

Страница: 21 / 40

CLI EAGLE 20
Release 5.0 08/2010
21
Figure 11: Commands in the Global Configuration mode
Note: You will find information on the line feed of the help texts below (see
on page 28 „Line length“ ) .
3.2 Executing commands
3.2.1 Syntax analysis
After you login to the CLI session, you enter the User Exec mode. The
(Hirschmann Eagle)>
prompt is displayed on the screen.
(Hirschmann Eagle) #configure
(Hirschmann Eagle) (config)#?
authentication Configure an authentication list.
config-watchdog Configure the Auto Configuration Undo settings.
denial-of-service Configure Denial of Service (flood protection)
parameters.
device-status Configure the device status settings.
dhcp-relay Modify DHCP Relay parameters.
dhcp-server Modify DHCP Server parameters.
exit Exit from current mode.
flm Control the Firewall-Learning-Mode.
help Display help for various special keys.
history Show a list of previously run commands.
interface Configure the interface parameters.
lldp Configure the LLDP settings.
logging Logging configuration.
nat Configure the NAT settings.
packet-filter Configure the packet-filter.
packet-forwarding Configure transparent mode packet forwarding
settings.
ping Send ICMP echo packets to a specified IP address.
radius Configure the RADIUS settings
redundancy Configure the redundancy settings.
save Save configuration.
show Display device options and settings.
signal-contact Configure the Signal Contact settings.
snmptrap Configure SNMPv3 traps.
sntp Configure SNTP settings.
temperature Configure the temperature limits.
traceroute Trace route to a specified host.
user-firewall Configure the user firewall settings.
users Manage Users and User Accounts.
vpn Configure VPN settings.