background image

 

 

 

 

10 

 

 

 

 

 

2 Safety 

 

 

Remember: 
Hazardous voltage can shock, burn or cause death ! 

 

 

The unit should only be operated after carefully reading the user manual, which is an 
integral part of the instrument. 

HIPOTRONICS and its sales partners refuse to accept any responsibility for consequential 
or direct damage to persons and/or goods due to none observance of instructions 
contained herein or due to incorrect use of the equipment. 

Further be aware that Safety is the responsibility of the user! 

 

2.0

 

General 

Safety is the most important aspect when working on or around high voltage electrical equipment. 

Personnel whose working responsibilities involve testing and maintenance of the various types of high 
voltage equipment must have understood the safety rules written in this document and the associated 
safety practices specified by their company and government. Local and state safety procedures 
should also be consulted. Company, regional or national regulations must be fulfilled beyond 
HIPOTRONICS recommendations. 

If the instrument is damaged or it is possible that damage has occurred, for example during 
transportation, do not apply any voltage. The instrument may only be used under dry operating 
conditions. 

Do not open the unit; it contains no user replaceable parts. 

People with heart pacemakers should not be in the vicinity of this system during operation. 

 

 

Safety is the responsibility of the user. Always operate the equipment in accordance with 
the instructions, always paying full attention to local safety practices and procedures. 

 

This equipment must be operated only by trained and competent personnel who are aware 
of the dangers and hazards involved in testing transformers.  
 

 

 

2.1

 

Essential Safety Recommendations 

 

Every terminal should be checked and verified before connection of the instrument. Ground 
connections may be left in place. 

 

 

 

Содержание OC-DI Series




























Отзывы: