HIOS BLOP-STC 3, Руководство по эксплуатации

Страница: 11 / 28

<Description of rear panel>
●
Ground terminal (GND)
• Ground terminal
●
Set terminal (SET)
•
Input terminal for work set signal.
• After the period set for the work set timer elapses from input of the set signal, the op-
eration LED is turned on and operation permission is provided for the electric screw-
driver. The VALVE signal is generated at the same time.
• Connect the detection switch so that there is a set signal input when there is no voltage
between the set terminal and the ground terminal.
<Caution>
In order to prevent incorrect operation, operation of the electric screwdriver is not per-
mitted until after the operating display LED lights orange.
●
Reset terminal (RESET)
• Input terminal for reset signal.
•
This resets the counter functions, interrupts generation of the valve signal and releases
the work piece being held by an external device.
AC inlet
Fuses and spare
fuses
<Rear Panel>
- 10 -
COMP
terminal
Reset
terminal
Set terminal
Ground terminal
+24V DC
terminal
Valve
terminal
Buzzer
terminal
Error buzzer
terminal