Hioki TS2400, Инструкция по эксплуатации, Страница: 80 / 116

76
Automatic measurement
The sub-sequence can be saved and deleted from the menu displayed when the right button of the
mouse is clicked.
Delete Last Line Deletes the last row.
Default Values
Initializes the sub-sequence.
By default, standby 1 is set for the initial sequence and end sequence and
measurement is set for sub-sequence 1 and sub-sequence 2.
Save
Saves the present sequence in a tab-delimited file.
Specify a folder and enter a file name to save the file.
Open
Opens the file selection dialog box.
Select and load the selected sequence file.
Adding movement steps at the same time
When the number of movement steps increases, it takes more time to set them. The move positions
and step positions can be automatically set all together using the batch addition function. It is only
necessary to enter the start and end positions and step interval of each axis.
1
Right-click an item and select Batch
Input .
2
Enter values in Start , End , and Steps for
X , Y , and Z .
Steps : Step size of the movement interval
(When the X-axis is set as shown above, the
stage moves from the 0 mm position to the
10 mm position on the X-axis in increments of
1 mm.)
3
Click and select Moving Order .
4
Click and select the stage motion.
When the stage
moves to the end
of one axis and is
retained at the end
position, another
axis starts moving.
When the axis
moves to the end,
it moves to the
start position with
another axis.