Hioki TS2400, Инструкция по эксплуатации, Страница: 69 / 116

65
Positioning a Workpiece
3
3.19 Positioning a Workpiece
Move the work table using the model Z5017 PLC Rack pendant so that a workpiece can be easily
set and secure the workpiece.
CAUTION
Be sure to secure a workpiece to the work table.
If the workpiece is not completely secured, it will fall when the work table accelerates/
decelerates, which may damage the workpiece or the instrument.
1
Switch the [OPERATION SELECTOR]
on the front of the model Z5017 to
[PENDANT] .
The [PENDANT] indicator lights up.
2
Switch the operation authority selector
on the pendant to [Pendant] .
The operation authority selector on the pendant
lights up.
Only when the selectors of the model Z5017 and
pendant match, the work table can be moved
using the selected PC or pendant.
3
Click Manual on the main window.
While checking the coordinates under Stage
Position , perform the following operation.
4
Press the [Enable] button on the
pendant (lit) and move the work table
using the joystick.
Joystick
Joystick operation
X-axis and Y-axis movement: Tilt the stick in
each direction.
Z-axis movement: Turn the knob of the joystick
to left or right. (Left: Downward, right: upward)
5
Secure a workpiece to the work table.