Hioki SM7860 Series, Инструкция по эксплуатации

Страница: 46 / 64

42
Timing Chart
When the output setting for the device interlocked is set to the discharging state
t1
Circuit A, B *
1
t2
0 V
Setting voltage
OFF
INTERLOCK
Circuit B *
2
0 V
Setting voltage
Setting voltage
Setting voltage
ＯＵＴ
1 (CH1) to (CH8)
OFF
ON
High-
impedance
High-
impedance
Discharge
Change
voltage
Change
voltage
ＯＵＴ
2 (CH1) to (CH8)
ＯＵＴ
3 (CH1) to (CH8)
ＯＵＴ
4 (CH1) to (CH8)
EXT I/O connector
Voltage output terminal
Internal voltage
The internal voltage follows either the pattern with *1 or that with *2 depending on models.
*1 SM7860-51, -52, -61, -62: OUT1 to OUT4
SM7860-53, -54, -63, -64: OUT1 to OUT2
SM7860-55, -56, -65, -66: OUT1
SM7860-57, -58, -67, -68: OUT1 to OUT3
*2 SM7860-53, -54, -63, -64: OUT3 to OUT4
SM7860-55, -56, -65, -66: OUT3
Interval Description Duration
t1 Time taken for the internal voltage to decrease from the
specified voltage to 0 V
Not specified
t2 Time taken for the internal voltage to increase from 0 V to
the specified voltage
7 s or less*
3
*3 The device does not accept any signals inputted into the EXT I/O connector during this period.