Hioki SM7860 Series, Инструкция по эксплуатации

Страница: 31 / 64

27
Configuring the Communications Protocol
When connecting the device to a PC
Use a crossover cable with female 9-pin D-sub connectors.
Crossover Wiring
Female 9-pin D-sub Female 9-pin D-sub Recommended cable:
Model 9637 RS-232C Cable (9 pin-
9 pin/1.8 m)
SM7860 side
PC/AT Enhanced
Graphics Adapter
Pin No. Pin No.
DCD 1 1 DCD
RxD 2 2 RxD
TxD 3 3 TxD
DTR 4 4 DTR
GND 5 5 GND
DSR 6 6 DSR
RTS 7 7 RTS
CTS 8 8 CTS
RI 9 9 RI
3.4 Configuring the Communications Protocol
Configuring GP-IB Interface Communications
GP-IB
Setting the GP-IB address
1
Press and hold both of the scroll keys ( [PAGE UP▲] and [PAGE DOWN▼] ) on the right of
the screen simultaneously for approx. 3 s.
(The address can be set from the P1 or P2 screen.)
The setting screen is displayed.
V A ( + ) I R : 1 0 0 0 . 0
V B ( + ) I R : 2 5 0 . 0
T E R M I N A L :
O U T 1 : 1 1 1 0 0 0 0 0
O U T 2 : 1 1 1 0 0 0 0 0
O U T 3 : 1 1 1 0 0 0 0 0
O U T 4 : 1 1 1 0 0 0 0 0
V M A : 1 0 0 0 . 0 O K
V M B : 2 5 0 . 0 O K
G P I B A D D R : 1
3 s
C L M 1 : 1 0 m A
C L M 2 : 1 0 m A
C L M 3 : 1 0 m A
C L M 4 : 1 0 m A
2
Press either of the scroll keys ( [PAGE UP▲] or [PAGE DOWN▼] ), set the desired address.
(Valid setting range: 1 to 30)
3
Turn off the device once you have finished configuring the settings.