Hioki HiTester 3443-01, Инструкция по эксплуатации

Страница: 32 / 46

20
―――――――――――――――――――――――――――
Chapter 3 Making Measurements
――――――――――――――――――――――――
NOTE
NOTE
3.4 Storing the Data
･
Variations in the surface condition and color of the
object whose temperature is to be measured may
cause the thermal emissivity
ε
to be somewhat
different from the values in the above table. If an
accurate temperature measurement is desired for an
object whose thermal emissivity is not known, black
body tape or black body spray (sold separately)
should be used. In this case the setting for thermal
emissivity (
ε
) should be the value indicated on
black body tape or black body spray.
Releasing the
MEAS
key
completes the
measurement and stores
the measured value in the
address indicated by
memory "No." Data can
be stored in any address
(1 to 84) by changing the
No. using the
▼ ▲
keys.
Further, multiple data can be stored in the same
address.
･
The maximum number of measurements that can be
stored is 130. A maximum of 130 measurements can
be stored in memories No. 1 to No. 64.
･
It is recommended to clear all memory data before
storing new data.
･
When the battery is runs out, all memory data is
lost.