Hioki HiTester 3443-01, Инструкция по эксплуатации

Страница: 22 / 46

10
―――――――――――――――――――――――――――
Chapter 2 Prior to Use
――――――――――――――――――――――――
rubber gasket
2.1 Battery Loading and Replacement
･
The thermometer does not come with the battery
loaded. Load the battery according to the procedure
described below.
･
If the battery indicator starts to blink,
promptly replace the battery.
･
If the main body is wet, be sure to wipe off the
water, set the battery box facing downward so that
any water in the joint will not enter the case, and
then remove the battery cover.
Dry battery used : Manganese battery 6F22 or alkali
battery 6LR61
1. Remove the battery cover.
Loosen the screws of
the battery cover at
the back of the main
body with the
accessory screwdriver
and remove the
battery cover.
2. Replace the
battery.
Remove the old
battery.
Check the polarity (+ or -) of the new battery, and
load it correctly.
3. Close the battery cover.
After the battery is loaded, close the battery cover,
and tighten the screws evenly and firmly.