Hioki HiLogger 3145-20, Инструкция по эксплуатации

Страница: 51 / 116

Communication Functions
47
1.
Connect the modem and the instrument with the 9721 RS-232C CABLE.
(
⇒
p. 23)
2.
Connect the modem to the PC with the RS-232C cable.
(You can also use USB cable or a PC card)
3.
Set the instrument's Comm screen. (
⇒
p. 25)
Example of Comm screen settings
Comm screen (PPP 1/5)
Set the mail server name and mail server IP address as shown below. Other settings are the
same as when communicating via a LAN.
When sending to the Internet service provider, you normally need to specify the server name.
"Telephone" Specify the PC at the Telephone.
"IP Address" Specify the server by IP.
"Server Name" Specify the server by host name. (DNS is required.)
Mail Dial Number : Set the telephone number of the Internet service provider to which
mail is connected or the telephone number on the PC side.
Connect Account : Set the user name of the Internet service provider or user name
(e.g., logger) to be entered in the PC's remote access server (i.e.,
Incoming Connections, dial-up server.)
Refer to " Answer Calls on the Instrument from the PC" (
⇒
p. 77).
Connect Password : Set the password of the Internet service provider or password (e.g.,
logger) to be entered in the PC's remote access server (i.e., Incom-
ing Connections, dial-up server.)
Refer to " Calling from the Instrument to PC" (
⇒
p. 97).
DNS : To use the DNS at the connected destination, select ON for this
item.
IP Address of DNS : To use the DNS at the connected destination, set the IP address of
the DNS. (For one DNS, set its IP address at No. 1; for two DNSs,
set their IP addresses at No. 1 and No. 2.)
When Using PPP
+
Modem
Modem
Model 9721 RS-232C CABLE (straight)
+Straight cable included with modem
USB, RS-232C
or PC Card
RS-232C
Public switched
network modem