Hioki 9593-03, Инструкция по эксплуатации

Страница: 11 / 66

6
2.3 Specifications
General specifications
Operating environment
Operating temperature
and humidity range
Storage temperature
and humidity range
Standards
Interface
Dimensions
Weight
Product warranty duration
Accessory
Indoor use, pollution degree 2, altitude up to 2000 m (6562 ft.)
0
℃ to 40 ℃ (32
゜
F to 104
゜
F)
90% RH (non-condensing)
-10 ℃ to 50 ℃ (14
゜
F to 122
゜
F)
95% RH (non-condensing)
EMC EN 61326 Class A
�N 61010
RS-232C
Approx. 123.5 mmW X 27 mmH X 94.9 mmD
(4.86"W X 1.06"H X 3.74"D)
Approx. 82 g (2.9 oz.)
3 years
Instruction manual
Interface specifications
Transfer system
Baud rate
Data length
Parity
Stop bit
Delimiter
Handshake
Set using the DIP switches.
Start-stop synchronization, full duplex
2400 bps, 4800 bps, 9600 bps, 19200 bps
7 bit, 8 bit
Even, odd, or none
1 bit, 2 bit
When sending: CR+LF, CR
When receiving: CR+LF, CR (no setting)
Not provided
Connector
D-sub 9-pin male with #4-40 locking screws
The connector on the 9593-03 is for terminal(DTE).
◎
50
09
4
0
08
30
07
20
06
1
0
◎
Signal assignments and explanation
PIN
Signal name
No. Common
JIS
Input/output SIgnal
1
DCD
CD
(U neon nected) Carrier detection
2
RxD RD IN Receive data
3
TxD SD OUT Transmit data
4
DTR ER (Fixed at ON level) Data terminal ready
5 GND SG GND Ground
6
DSR DR (U neon nected) Data set ready
7
RTS RS
(Fixed at ON level) Request for send
8
CTS CS (U neon nected) Clear to send
，
RI Cl (U neon nected) Calling indicator
2.3 Specifications
HIOKI 9593C981-01