Hioki 9593-03, Инструкция по эксплуатации

Страница: 64 / 66

59
Chapter 6
Troubleshooting
If the RS-232C appears to be malfunctioning, refer to the information below
before calling for servicing.
Symptom Cause/ Treatment
Are the cables properly connected?
The RS-232C has stopped
-----------------------------------------------------------------------------------------
Are all the devices powered on?
working completely.
Has the communication condition been correctly set?
Using the "*ESR?" query, inspect the standard event
Although a command has been status register, and check what type of error has
transmitted, nothing has
occurred.
-----------------------------------------------------------------------------------------
happened.
Using the ":SYSTem:ERRor?" query, and check whether
transmission error occurred on the RS-232C.
Has an error occurred?
Sending several queries,
Send the queries one at a time, and read the responses
individually.
produces only one response.
When you want to read them in all at once, try doing so
by putting them all on one line separated by the message
separator character.
The response message to a
Due to the response message being produced at the
query differs from the display
instant that the 3157 receives the query, there is a
on the front panel of the 3157.
possibility that it may not agree with the display at the
instant that the controller reads it in.
Service
If damage is suspected, read the "Troubleshooting" section to remedy the problem.
If this does not help you, contact your authorized Hioki distributor or reseller.
HIOKI 9593C981-01