Hioki 9518-02, Инструкция по эксплуатации, Страница: 48 / 86

42
────────────────────────────────────────────────────
5.4 Commands Specific to the 3157
────────────────────────────────────────────────────
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Unused Unused Unused Unused EOM LFAIL UFAIL PASS
Event status enable register 0 (ESER0)
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Unused Unused Unused Unused EOM LFAIL UFAIL PASS
Event status enable register 0 (ESER0)
:ESE0
■ Sets event status enable register 0.
:ESE0?
■
Queries event status enable register 0.
Syntax :ESE0
Function Sets event status enable register 0 (ESER0) to the bitmask for controlling
access to events in event status register 0 (ESR0).
The numerical value can be in NRf format, but any digits after the decimal
point will be rounded.
When the power is turned on, the data is reinitialized to zero.
Example
Transmission
:ESE0 4
Bit 2 of ESER0 is set to 1.
Error If <data> is other than numerical value described above, an execution error
occurs.
Syntax :ESE0?
Function
Returns the value of event status enable register 0 (ESER0) as a numerical
value in NR1 format between 0 and 15.
Example
Response
If headers are on :ESE0 4
If headers are off 4
Error
If the response message is longer than 300 bytes, a query error is generated.