Hioki 9196, Инструкция по эксплуатации

Страница: 35 / 44

2 Operation
9
HIOKI
1
2
3
4
5
6
7
8
9
10
11
付録
索引
Operation
2
• Before turning the product on, make sure the source volt-
age matches that indicated on the product's power connec-
tor. Connection to an improper supply voltage may damage
the product and present an electrical hazard. (100 to 240
ACV)
• To avoid electric shock and ensure safe operation, connect
the power cable to a grounded (3-contact) outlet.
• The voltage application probe continuously outputs volt-
age while the voltage application button is being pressed.
While it is outputting, or any time that the voltage applica-
tion button is being pressed intentionally, a dangerous
amount voltage is present is at the tip of the probe. To
avoid electrical shock, do not touch either the device under
test or the probe tip.
The 9196 is only able to operate to its full capability after it has
been properly grounded. Always use the power cord (grounded
three-core power cord) that is supplied with the unit to ground the
unit.
1.
Be sure that the power switch is turned to
OFF.
2.
Being sure that the power source is of the
correct voltage, connect the grounded
three-core power cord provided to the
power inlet on the back of the 9196.
3.
Insert the plug into the outlet. The cord is
automatically grounded.
4.
Connect the 9190 VOLTAGE APPLY
PROBE provided to the connecting terminal
on the front of the 9196.
5.
Set the power switch on the front of the unit
to ON.
Verify that the main power monitor lamp
(POWER MONI) is illuminated when the
switch is set to ON.
9196 APPLY UNIT
9190 VOLTAGE APPLY
PROBE