Hioki 9196, Инструкция по эксплуатации

Страница: 30 / 44

4
HIOKI
Usage Notes
Follow these precautions to ensure safe operation and to obtain
the full benefits of the various functions
.
• To avoid electric shock, do not allow the product to get wet,
and do not use it when your hands are wet.
• Do not use the product where it may be exposed to corro-
sive or combustible gases. The product may be damaged
or cause an explosion.
• Do not install the product with any side except the bottom facing
down. This may cause a fire or other malfunction in the product.
• Avoid stepping on or pinching the cable, which could damage
the cable insulation.
• To avoid damaging the probe, do not bend or pull the probe.
• To avoid damaging the power cord, grasp the plug, not the cord,
when unplugging the cord from the power outlet.
• To avoid damage to the product, protect it from vibration or
shock during transport and handling, and be especially careful to
avoid dropping.
Handling this device
• Do not store or use the product where it could be exposed to
direct sunlight, high temperature or humidity, or condensation.
Under such conditions, the product may be damaged and insu-
lation may deteriorate so that it no longer meets specifications.
• This product should be installed and operated indoors only,
between 5 and 40°C and 35 to 95% RH
• This product is not designed to be entirely water- or dust-proof.
To avoid damage, do not use it in a wet or dusty environment.
• Do not use the product near a device that generates a strong
electromagnetic field or electrostatic charge, as these may
cause erroneous measurements.
• Accurate measurement may be impossible in the presence of
strong magnetic fields, such as near transformers and high-cur-
rent conductors, or in the presence of strong electromagnetic
fields such as near radio transmitters.
Setting up the 9196