Hioki 3645-20, Инструкция по эксплуатации

Страница: 9 / 40

v
_____________________________________________________________________
Notes on Use
______________________________________________________________
DANGER
The maximum input voltage is 60 V DC. Attempting
to measure voltage in excess of the maximum input
could destroy the product and result in personal injure
or death.
WARNING
To avoid electric shock, do not allow the product to get
wet, and do not use it when your hands are wet.
To avoid electric shock, shut off the line power supply
before connecting the connection cable to the
terminals.
CAUTION
To avoid electric shock, before replacing the connection
cable, remove the all connection cable from the device to
be measured.
To avoid damaging connection cable (especially where the
leads connect to the probes), do not kink or pull on the
leads.
This product is designed for indoor use, and operates
reliably from 0 to 40 .
Do not store or use the product where it could be exposed
to direct sunlight, high temperature or humidity, or
condensation. Under such conditions, the product may be
damaged and insulation may deteriorate so that it no longer
meets specifications.
This product is not designed to be entirely water- or dust-
proof. To avoid damage, do not use it in a wet or dusty
environment.
Notes on Use
In order to ensure safe operation and to obtain maximum
performance from the unit, observe the cautions listed
below.