Hioki 3636-20, Инструкция по эксплуатации

Страница: 30 / 40

20
_____________________________________________________________________
Settings
______________________________________________________________
・
Previously recorded logger data is erased
when recording is resumed. Be sure to load
data to be saved to COMMUNICATION BASE
or to personal computer before recording.
・
At any other time even when interval setting
display is not shown, except during recording
and waiting for recording, communication with
COMMUNICATION BASE is available.
However communication is disabled when
logger is set to sleep.
3.3 Setting by COMMUNICATION BASE
(1) Press logger INTERVAL button lightly to display LCD.
(2) When logger LCD shows
REC mark or clock icon,
press REC/STOP button for more than 1 second to stop
recording.
During recording or waiting time before recording start
time, data transfer cannot be established with
COMMUNICATION BASE.
(3) Press logger INTERVAL button to display interval
setting display. ( INTVL appears.)
(4) Connect COMMUNICATION BASE with logger.
(5) Press COMMUNICATION BASE SEND button for
more than 1 second to send data settings to logger.