17
FIG. 6
Scoop on top
STEP 4.
Insert allen head bolts through roller bracket.
The scoop on the roller bracket is located
towards the top of the center support.
See
Fig. 6.
Use four barrel nuts and allen head screws
to attach the roller brackets to each end of
the top supports.
FRONT
REAR
ASSEMBLED CENTER SUPPORT
STEP 5.
Make sure the front and rear of the center
support are oriented correctly. See com-
pleted picture below.
Attach the center support to the two carriage
rollers using the J-hook screws. Secure the
J-hook screws using a 1/4” washer and wing
nuts.
See Fig. 7
Using all 4 J-hook screws, attach both ends
of the center support to both of the carriage
track rollers.
FIG. 7
