11
ROLLER END ASSEMBLY INSTRUCTIONS
Locate bag of hardware labeled “Roller End Hardware”
NOTE:
If, in the future you wish to make your frame longer or shorter, you can order additional
metal inserts and required hardware to build additional rollers and carriage tracks. Call
us at
(319) 378-0999
for details
FIG. 1
STEP 1.
Inserting Metal Roller Ends
Tap the inserts into the end of the metal
rollers evenly with a hammer. Don’t tap
on the end of the bolt, because you may
damage the threads. Tap around the
edges of the silver round end. If it goes in
unevenly at first, keep tapping, it should
straighten itself out as it goes in. The
metal edges of the insert should be
seated on the ends of the roller. If the
roller ends are rough, you can file them
down. Repeat until all rollers have inserts
on both ends.
See Fig. 1 & 2
FIG. 2
