Installation Instructions for:
105295-HEI Kit
Gen1 to Gen5
Control System
Models Affected
This instruction describes how to install the
100839-HEI on the following Genie machines only:
GS-1530/1532/1930/1932
(before S.N. 75000)
GS-2032/2632
(before S.N. 75000)
GS-2046/2646/3246
(before S.N. 75000)
GR-12/15/20
(after GR05-4999)
Important:
The procedure outlined in these instructions may only
be performed by personnel who can identify risks and
potential hazards and have been qualified to work with
the specific equipment concerned.
Read this entire procedure before beginning. Follow
instructions when performing the procedure. Shortcuts
may cause expose you and others to potentially
dangerous conditions.
Required to Perform Procedure:
#2 Slotted screwdriver
11/32 inch combination wrenches
7/16 inch combination wrenches
Dielectric grease
Suitability for Application
The end-user alone knows the specific needs of their
application. Therefore, the end-user of this product is
responsible to make decisions regarding the suitability
of use with regard to their intended application. The
customer is also responsible to ensure that products
installed will conform to all applicable laws and
regulations established by nation, state, locality, and
regulating body.
Trademarks
The Genie brand name and model numbers are
copyrighted by and trademarks of the Terex
Corporation.
P/N 105294-HEI Rev.0
HEI
3/ 16
