HM160 MAX
8
All Memory Scan
M1 – M2 – M3 - … M10 – M1- …
All Scan
CH1-CH2-CH3-…..-CH88-CH1
Priority Memory Scan
M1 – CH 16 – M2 – CH 16 - … CH 16 – M1 – M16 - …
(M1; M2; M3 means 1
st
, 2
nd
, 3
rd
programmed channel)
Priority All Scan
CH1-CH16-CH2-CH16-CH3-CH16-…..CH88-CH16-L1-CH16-…
(The radio only has L1 as its private channel.
MEM
Press the MEM to enter the memory mode when there is at least one channel in the memory. The channel sequences
will follow the programmed channels in the memory. The “MEM” icon will be turned on. Short press the SCAN will
start MEMORY SCAN.
Adding/Deleting CH from the memory:
1. During the normal mode, use the Coding Knob to select the desired channel for programming.
2. Long press the MEM key to store up the channel as memory channel.
3. The “M” icon shows up to indicate the current channel has been saved in the memory. No limited of memory
channels.
4. Separate memory channel exists for USA, International, and Canadian Frequency group.
5. During the normal mode, short Press the coding knob twice to select the channel to be deleted.
6.
Long press the MEM key to delete the channel from the memory.
Watch
Dual Watch
Short press DW/TriW key to activate the DUAL WATCH mode. Monitor the current channel and Ch 16 in cycle.
Whenever, Weather Alert is activated, the Wx Alert channel will be monitored once every 4sec.
Current Channel - CH 16 – Current Channel – CH 16 – Wx Alert - Current Channel -
…
Tri Watch
Long press DW/TRI key to activate the TRI WATCH mode. Monitor the Ch 16, current channel and the 2nd Priority
CH in cycle.
Note: programmed channel is the secondary priority Channel. Default secondary priority channel is CH9.
Current Channel – CH 16 – 2nd Priority CH – Current Channel – CH 16 – 2nd Priority CH – Current Channel - …
Note: When weather Alert is enabled, similar scheduling as the Dual-watch is used.
