HIMS BLAZE ET, Быстрый старт

Страница: 10 / 21

Quick Start Guide
– Blaze ET
7
ET and connect the small end of the USB cable provided with the
unit to the Micro USB port on the front edge and connect the
larger end to your PC's USB port.
Once you connect to your PC, click the "My computer" icon on
the PC. The Blaze ET appears as a portable media device under
Windows labeled Blaze ET. if you open "Blaze", you will see
Blaze ET's drive under "Internal Storage". If you have an SD card
inserted, it appears as "SD card".
You may copy and organize documents, media, DAISY books
and scanned images in whatever way makes the most sense to
you. The Blaze ET will locate playable content no matter where it
resides on the disk and index it and make it available for the
associated programs.
You may also charge the unit via the Micro USB port, either via a
PC or a USB wall adapter.
6. Powering On/Off
To power on the Blaze ET, press and hold the Power button for 5
seconds. The first time you insert the battery or connect AC
power to the Blaze ET, the unit automatically boots with a short
beep followed by a musical flourish with "HIMS" spoken. After
this, progress beeps are heard, followed by the power on sound,
and you are placed at the Home Menu, described in the next
section. To power off Blaze ET, press and hold the Power button
again for 5 seconds. The power down sound is heard, and the
unit is powered off.
After the initial boot sequence described above, you can power
the unit on and off quickly by pressing and holding the “Power”