![background image](http://html1.mh-extra.com/html/hilti/wsc-85/wsc-85_operating-instructions-manual_2136432017.webp)
15
Method of use
Rotation against the direction of feed (up-
cutting)
Rotation with the direction of feed
– only
in stationary machines with mechanical feed
General information
1. Application
Circular saw blades may be used in hand-held
machines and stationary machines. It is
essential, however, that the blade’s specifi -
cation is in conformance with the technical
data applicable to the machine used, the
require ments set by the machine’s manufac -
turer, the instructions on care and maint en ance
and the safety instructions for the machine.
2. Packaging and transport
The blade must be handled very carefully
when it is unpacked or re-inserted in the
package and when being fitted to the
machine. The very sharp cutting edges may
cause personal injury.
3. Use
The maximum permitted speed (r.p.m.) must
not be exceeded. Clean the area of the blade
in contact with the clamping flange carefully
before fitting.
4. The blade
Check the cutting edges. Check the machine
settings. The arrow on the circular saw blade
indicating direction of rotation must corres -
pond to the direction of rotation indicator on
the circular saw. Disconnect the supply cord
from the mains supply in order to ensure that
the machine cannot be started unintentionally
while the blade is being changed.
5. Before starting
The blade must be fitted and secured in acc or -
dance with the directions given by the
Circular saw blades
Correct use
The circular saw blades are used for ripping, cross cutting and cutting grooves
in wood, wood materials, other similar materials or composites. If the system
is not used for the intended purpose, the machine and / or saw blade can be
damaged or fragments of the saw blade might break away. Fragments of the
saw blade which fly off or are stuck in or on the wood workpiece, increase the
risk of injury. In particular, metal foreign matter in wood, such as loose nails,
can cause saw teeth to catch and break or might be torn out of the workpiece
and exert an unforeseen force (reaction) on the operator's wrist / hand.
When selecting a circular saw blade, remember that it may be
used only for the materials recommended in the application
information.
You have purchased a high performance saw blade. It is essential that
the applicable safety regulations, instructions concerning protective
measures and the safety precautions listed in these operating
instructions are observed whenever the blade is handled or in use.
The most important safety precautions are summarised on these pages.
Please read them carefully before using the saw blade.
Hilti Corporation
, Feldkircherstrasse 100,
FL-9494 Schaan
Paolo Luccini
Jan Doongaji
Head of BA
Ececutive Vice President
Quality & Process Management
BU Power Tools & Accessories
BA Electric Tools & Accessories
01/2012
01/2012
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
9. EG declaration of conformity
(original)
Description:
Hand-held circular saw
Designation:
WSC85
Serial no.:
00000000–99999999
Year of design:
2003
We declare, on our sole responsibility, that this product com-
plies with the following directives and standards: 2004/108/EC,
2006/42/EC, EN 60 745-1, EN 60 745-2-5, EN ISO 12100,
2011/65/EU.
Printed: 08.07.2013 | Doc-Nr: PUB / 5071333 / 000 / 01