5
en
6. Assembly
1. It is essential that the safety precautions printed in
these operating instructions are read and observed.
2. It is essential that a new battery is charged correctly
before initial use so that the battery cells can form
correctly. Incorrect initial charging can lead to a per-
manent reduction of battery capacity.
– With the C 7/24 charger: Charge for 24 hours in nor-
mal charging mode or for 12 hours in conditioning
mode.
– With the C 7/36-ACS charger: The charger detects
automatically whether initial charging or normal
charging is necessary.
-NOTE-
G
The tool may be used only with B24/2.0 NiCd, B24/2.4
NiCd or B24/3.0 NiMH batteries.
G
Battery performance drops at low temperatures.
G
Batteries should be stored at room temperature.
G
Never store batteries where they are exposed to the
heat of the sun, on a radiator, behind a motor vehicle
windscreen or at a window.
G
Never use the battery until the cells become fully dis-
charged. Change to the second battery as soon as a
drop in performance is noticed and recharge the bat-
tery immediately so that it is ready for re-use.
G
Use bits with a standard
1
/
4
″
hex. shank.
6.1 Fitting the side handle
1. Open the side handle clamping band by turning the
handle.
2. Slide the side handle clamping band over the chuck
and onto the tool.
3. Pivot the side handle into the desired position.
4. Secure the side handle by turning the handle.
5. Technical data
Tool
Rated voltage
24 V –––
- - -
Weight of tool including battery and chuck
3.8 kg (8.3 lb)
Dimensions (L
×
H
×
W)
320x286x92 mm (12.6x11.2x3.6 in)
Speed
1
st
gear: 0– 350 r.p.m.
2
nd
gear: 0– 1300 r.p.m.
3
rd
gear: 0– 1950 r.p.m.
Chuck / clamping dia. range (quick-release chuck)
1.5–13 mm (0.06–0.5 in)
Torque
Max. 45 Nm (at drilling setting)
Torque adjustment
5–17 Nm (in 15 increments)
Speed control
Electronic control switch
Forward / reverse
Electrical switch with interlock to prevent activation
when running
Spindle lock
When control switch is in the “off” position
Motor brake
By way of the control switch
Gearing section sealed to prevent entry of dust and with permanent lubrication (maintenance-free)
Battery
B24/2.0 NiCd
B24/2.4 NiCd
B24/3.0 NiMH
Rated voltage
24 V –––
- - -
24 V –––
- - -
24 V –––
- - -
Battery capacity
24 V
×
2.0 Ah
24 V
×
2.4 Ah
24 V
×
3.0 Ah
= 48 Wh
= 58 Wh
= 72 Wh
Weight
1.38 kg (3.0 lb) 1.38 kg (3.0 lb) 1.45 kg (3.2 lb)
Temperature monitoring
yes
yes
yes
Type of cell
Nickel-cadmium Nickel-cadmium Nickel-metal hydride
SUB C type
SUB C type
SUB C type
No. of cells
20
20
20
Right of technical changes reserved!
Printed: 07.07.2013 | Doc-Nr: PUB / 5071285 / 000 / 00
Содержание UH 240-A
Страница 3: ...1 2 3 2 3 R L STOP 1 15 5 7 9 1 15 4 5 Printed 07 07 2013 Doc Nr PUB 5071285 000 00 ...
Страница 4: ...6 7 1 Printed 07 07 2013 Doc Nr PUB 5071285 000 00 ...
Страница 14: ...Printed 07 07 2013 Doc Nr PUB 5071285 000 00 ...
Страница 24: ...Printed 07 07 2013 Doc Nr PUB 5071285 000 00 ...