Hilti TE 70-D/AVR, Руководство пользователя

Страница: 10 / 16

8 English
@
Dust shield
;
Chuck
=
Accessory tool release
%
Control switch
&
Grip
(
Service indicator
)
Supply cord
+
Side handle
3.2 Intended use
The product described is an electrically powered rotary hammer. It is designed for drilling in concrete,
masonry, metal and wood.
▶
The power tool may be operated only when connected to a power supply providing a voltage and
frequency in compliance with the information given on its type plate.
3.3 Active Vibration Reduction (AVR)
The rotary hammer is equipped with an Active Vibration Reduction (AVR) system, which reduces vibration
significantly.
3.4 Service indicator
The rotary hammer is equipped with a service indicator LED.
Status Meaning
The service indicator lights red. • End of service interval – servicing is due. After
the lamp lights up for the first time, the power
tool may continue to be used for several hours
before the automatic cut-out is activated. Bring
the rotary hammer to Hilti Service in good time
so that your rotary hammer always remains
ready for use.
The service indicator blinks red. • Have the rotary hammer repaired by Hilti Service
if necessary.
3.5 Items supplied
Rotary hammer, side handle, operating instructions.
Note
You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.group .
4 Technical data
Note
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool’s
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer’s power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be 5% and -15% of the rated voltage of the power tool.
Rated current input
9.9 A
Weight in accordance with EPTA proce-
dure 01/2003
8.3 kg
Single impact energy in accordance with
EPTA procedure 05/2009
11.5 J
Ø Hammer drill bits 12 mm …45 mm
Ø Drill bits for wood
10 mm …32 mm
Ø Drill bits for metal 0 mm …20 mm
Printed: 01.06.2017 | Doc-Nr: PUB / 5354919 / 000 / 00