Hilti TE 70-D/AVR, Руководство пользователя

Страница: 11 / 16

English 9
4.1 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values determined in accordance with EN 60745-2-6
Sound (power) level (L
WA
) 113 dB(A)
Uncertainty for the sound power level (K
WA
) 3 dB(A)
Emission sound pressure level (L
pA
) 102 dB(A)
Uncertainty for the sound pressure level (K
pA
) 3 dB(A)
Total vibration (vector sum of three directions), measured in accordance with EN 60745-2-6
Hammer drilling in concrete (a
h, HD
) 10 m/s²
Uncertainty (K) 1.5 m/s²
5 Operation
5.1 Fitting the side handle
CAUTION
Risk of injury! Loss of control over the rotary hammer drill.
▶
Check that the side handle is fitted correctly and tightened securely. Check that the clamping
band is engaged in the groove in the tool.
▶
Fit the side handle.
5.2 Fitting / removing the accessory tool
Note
The use of unsuitable grease may cause damage to the tool. Use only the recommended grease
supplied by Hilti.
Check the accessory tool for damage or uneven wear each time before use and replace it if necessary.
Printed: 01.06.2017 | Doc-Nr: PUB / 5354919 / 000 / 00