Hilti PR 30-HVSG A12, Руководство пользователя

Страница: 32 / 434

24 English
▶
Do not charge or continue to use damaged batteries (e.g. batteries with cracks, broken parts, bent
or pushed-in and/or pulled-out contacts).
▶
Recharge only with the charger specified by the manufacturer. A charger that is suitable for a certain
type of battery may present a risk of fire when used with other types of battery.
▶
Observe the special guidelines applicable to the transport, storage and use of Li-ion batteries.
▶
The battery must be insulated or removed from the tool before the tool is shipped or sent by mail.
Leaking batteries may damage the tool.
▶
If the battery gets noticeably hot when not in use, this may indicate that the battery or the tool / battery
system is faulty. In this case, place the tool in a non-flammable location, well away from flammable
materials, where it can be kept under observation and allowed to cool down.
3 Description
3.1 Product overview
3.1.1 PR 30-HVSG A12 rotating laser
1
@
Laser beam (plane of rotation)
;
Rotary head
=
Sight
%
Grip
&
Battery release button
(
Li­ion battery
)
Battery state-of-charge display
+
Control panel
§
Base plate with 5/8" thread
3.1.2 PR 30-HVSG A12 control panel 2
@
Inclined plane mode button and LED
;
Shock warning function button and LED
=
Speed of rotation button
%
LED for status “On/off” and “Auto-leveling”
&
On/off button
(
Surveillance mode LED (only with auto-
matic vertical alignment)
)
Battery charge status LED
3.1.3 PRA 30G laser receiver and control panel 3
@
Menu button
;
Decrease inclination, to the left. Move
PRA 90 down. Navigation in menu.
=
Automatic alignment / surveillance mode /
marking function
%
OK button
&
Increase inclination, to the right. Move
PRA 90 up. Navigation in menu.
(
On/off button
)
Display
+
Marking notch
§
Detection window
3.1.4 PRA 30G laser receiver display 4
@
Distance of the laser beam from the mark-
ing notch
;
Volume indicator
=
Indicator showing beam segments
switched off or on
%
Battery status indicator
&
Accuracy indicator
(
Position of the receiver relative to the
height of the laser plane
3.2 Intended use
The product described is a rotating laser with a visible rotating laser beam. It can be operated by one person.
The tool is designed to be used to determine, transfer and check levels, verticals, slopes and right angles.
▶
Use only the Hilti B 12⁄2.6 Li-Ion battery for this product.
▶
Use only the Hilti C 4⁄12­50 charger for this product.
3.3 Auto-leveling
Auto-leveling takes place after the tool is switched on. LEDs indicate the current operating status. Auto-
leveling is active and can be deactivated by way of the button. The tool can be set up directly on the
ground or floor, on a tripod, or with the aid of suitable mounting brackets.
Printed: 29.09.2017 | Doc-Nr: PUB / 5377009 / 000 / 00