Hilti PR 30-HVSG A12, Руководство пользователя

Страница: 39 / 434

English 31
4. Press the
button on the rotating laser.
◁
The inclined plane mode LED on the rotating laser lights constantly.
◁
The inclined plane mode symbol is shown on the PRA 30G laser receiver.
5. Use the or buttons on the laser receiver to incline the laser plane.
Note
When the angle of inclination is set manually, the rotating laser levels the laser plane once and then
fixes it. Vibration, changes in temperature or other influences that may occur during the course of
the day may affect the position of the laser plane.
5.11 Setting the inclination using the PRA 79 slope adapter
Note
Depending on the application, the PRA 79 slope adapter can be mounted on a tripod or on a wall
bracket.
The angle of inclination of the PRA 79 slope adapter is set to 0°.
1. Mount the rotating laser on the PRA 79 slope adapter. Observe the operating instructions for the PRA 79
slope adapter. The control panel of the rotating laser should be facing you.
2. Position the rotating laser either at the upper edge or lower edge of the inclined plane.
3. Press the button on the rotating laser.
◁
The laser switches on, the beam begins to rotate and the “auto leveling” LED lights as soon as the
tool has leveled itself.
4. Press the button on the rotating laser.
◁
The inclined plane mode LED on the rotating laser lights constantly.
5. Set the PRA 79 slope adapter to the desired angle of inclination.
Note
When the angle of inclination is set manually, the rotating laser levels the laser plane once and then
fixes it. Vibration, changes in temperature or other influences that may occur during the course of
the day may affect the position of the laser plane.
5.12 Setting inclination automatically 13
Note
The rotating laser, depending on the application, is mounted or positioned securely.
The PRA 30G laser receiver and the rotating laser are paired.
The PRA 30G laser receiver and the receiving side of the rotating laser are facing each other and in
direct line of sight. The best receiving side of the rotating laser is the side at which the battery is inserted.
1. Position the rotating laser either at the upper edge or lower edge of the inclined plane.
2. Press the
button on the rotating laser and the PRA 30G laser receiver.
◁
The laser switches on, the beam begins to rotate and the “auto leveling” LED lights as soon as the
tool has leveled itself.
3. Press the button on the rotating laser.
◁
The inclined plane mode LED on the rotating laser lights constantly.
◁
The inclined plane mode symbol is shown on the PRA 30G laser receiver.
4. Position the marking notch on the PRA 30G laser receiver at the other edge of the inclined plane.
5. Begin automatic alignment by double-clicking the button on the PRA 30G laser receiver or select the
corresponding function in the AUTO menu.
◁
The rotating laser inclines the laser plane on the X-axis automatically until the mark at the PRA 30G
laser receiver is reached. An signal tone is emitted by the laser receiver repeatedly during this
procedure.
◁
The rotating laser levels itself on the Y-axis once the position has been reached. Successful
completion is indicated by a continuous signal tone with a duration of 5 seconds. The
symbol is displayed briefly.
▽
If automatic alignment cannot be completed successfully, short signal tones are emitted and the
is displayed briefly.
Printed: 29.09.2017 | Doc-Nr: PUB / 5377009 / 000 / 00