13
7. Operation
7.1.3 Measure keys
"Measure" key
– switches the range meter On
– activates the laser beam
for aiming at the target,
– activates single distance
measurement
– activates and deactivates
continuous distance
measurement.
Side "Measure" key
– activates the laser beam for
aim ing at the target,
– activates individual distance
measurement
– activates and deactivates
continuous distance
measurement.
7.1.4 Function keys
Calculation functions are activated by
pressing the relevant function keys. When
a measurement using a function has been
carried out incorrectly or unintentionally,
the function can be reset at any time by
pressing the same function key again or
any other function key.
Volume
– activates the "volume"
function and deactivates
every other function.
Area
– activates the "area" function
and deactivates every other
function.
Plus
– activates the "distance
addition" function and
deactivates every other
function.
Minus
– activates "distance
subtraction" and deactivates
every other function.
Indirect distance
measurement
– activates the "Indirect
Measurement" function
and deactivates every other
function.
Min. / Max.
– activates the "MIN. / MAX."
function and deactivates
every other function.
7.2 Display
The display shows the measurements,
settings and range meter status.
In the measuring mode, the latest readings
are shown in the lowest display line (result
line) and the prior readings in the lines
above. For such functions such as area,
volume, Pythagoras, etc., the measured
distances are displayed in the intermediate
lines and the calculated result appears in
the lowest display line (result line).
Printed: 07.07.2013 | Doc-Nr: PUB / 5070013 / 000 / 00
