![background image](http://html1.mh-extra.com/html/hilti/nuron-ncr-60-d-22/nuron-ncr-60-d-22_original-operating-instructions_2135091022.webp)
18
English
2321724
*2321724*
▶
If you notice oil escaping, cease working with the tool and consult
Hilti
Service. Immediately remove the
leaked oil.
▶
Check that the locking pin is pushed in all the way and securely engaged.
▶
Throughout the crimping operation, take great care to keep your hands and fingers well clear of the
crimping head.
▶
Switch the crimping tool on only after bringing it to the working position.
▶
Wait until the product has come to a complete stop before you lay it down.
▶
Be extra-careful when working on lines that are under mechanical tension.
▶
Always hold the crimping tool firmly with both hands on the grips provided for the purpose.
▶
Before each use, inspect the black coating on the crimping head for indications of damage or aging. If
you find such damage, the red coating is visible and/or the crush-hazard or electric-shock hazard symbol
is no longer legible, do not use the crimping tool and contact
Hilti
Service.
▶
Do not secure a belt hook to this power tool.
▶
Risk of injury by falling tools and/or accessories. Before starting work, check that installed accessories
are secure.
▶
Do not look directly into the light source (LED) of the product and do not aim the beam at other persons’
faces. Risk of dazzling or eye damage.
▶
Keep the retaining strap and the tether clean and dry.
Electrical safety
▶
Before use of the crimping tool, all live cables and other equipment carrying electric voltage within the
area in which the user is working are to be switched off. If this is not possible, the corresponding safety
precautions for working in proximity to electrically live cables or equipment applicable in your country
must be implemented and observed.
▶
Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the product could give you an electric shock or cause an explosion if you
accidentally damage an electric cable or a gas or water pipe.
▶
Do not crimp live parts, i.e. parts carrying electric voltage. The crimping tool must be considered as being
uninsulated and must therefore be used in combination with personal protective equipment (protective
gloves, protective footwear, protective clothing, etc.) of a type suitable to provide protection for yourself
and other persons in the vicinity. It is essential to ensure adequate insulation for working in the vicinity of
electrically live lines, for example by the use of solid insulating material or maintenance of an adequate
air gap. Among other uses, the crimping tool is suitable for use on electrically insulating aerial lifts or
platforms.
▶
In order to use the crimping tool in the vicinity of electrically live lines, the user must:
▶
take all different potentials (voltages) into account.
▶
make sure that all chosen measures and tools are appropriate for the application.
▶
be trained for working on electrically live lines.
▶
wear fit-for-purpose personal protective equipment.
▶
wear appropriate, close-fitting clothing.
▶
remove metallic lifestyle accessories such as jewelry.
Power tool use and care
▶
After approx. 50 consecutive crimping operations, switch the power tool off and allow it to cool down for
about 15 minutes. Overheating can lead to damage to the crimping tool.
▶
Store the crimping tool in a dry place inaccessible to children and unauthorized persons.
▶
Hilti
recommends having the crimping tool overhauled by
Hilti
Service after 15,000 crimping operations.
2.3
Battery use and care
▶
Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶
Use only batteries that are in perfect working order.
▶
Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶
Do not under any circumstances modify or tamper with batteries!
▶
Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶
Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶
Never use recycled or repaired batteries.