![background image](http://html1.mh-extra.com/html/hilti/ds-ts20-e/ds-ts20-e_operating-instructions-manual_2136337009.webp)
9
Specific safety rules and symbols
Read the operating
instructions before use.
General warning
Warning: electricity
Removing cooling water from the saw head and power supply
1. Connect the blow-out adapter to the hose on the HIT pump.
2. Blow out the saw head 7 times with the HIT pump.
3. Blow out the power supply at the water outlet 4 times with the
HIT pump.
water in
max 87psi
359294
< 39°F
359293
357860
max. 150kg
The saw head and accessory transport
trolleys may be lifted by crane only at the
lifting points provided.
Before transport, all items of equipment
must be secured to prevent movement
or falling.
Never loiter in the vicinity of loads sus-
pended by cranes.
Use only tested and approved lifting gear.
! !
Handle with care!
320489
The power supply may be lifted by crane
only at the lifting points provided.
Never loiter in the vicinity of loads sus-
pended by cranes.
Use only tested and approved lifting gear.
> 5°
357985
The transport trolley may become unsta-
ble or run away if stood on an inclined
surface.
Wear
protective gloves.
Wear ear protection.
Wear
safety footwear.
Wear
respiratory
protection.
Wear
eye protection.
Wear
a hard hat.
CAUTION: Risk of Electric
Shock. Connect only to
properly grounded outlets.
359292
WARNING: Disconnect
Power and wait 5 minutes
before opening for service
359275
Do not touch metal parts of saw head
and E-box during operation except main
switch at E-box.
Before opening the E-box for service
disconnect the E-box from electric power
supply wait 5 minutes to allow the capa-
citotors to discharge
No modifications may be made to the saw system.
Modification of the factory-set drive parameters is stric-
tly prohibited.
Safety instructions for transporting the
equipment
Avoid lifting and carrying heavy objects. Use suitable
lifting equipment and means of transport and share
heavy loads between several people.
Use the handles provided for transportation. Always
keep the handles clean and free of grease.
Bear in mind that the machine could fall over. Stand it
only on a solid, level surface.
Make sure that the saw system and its components
cannot move about or fall over during transportation.
The machine may be lifted by crane only at the lifting points
provided using tested and approved lifting gear. Before
lifting, check that all removable items of equipment are
securely attached to the two transport trolleys or locked
in position. Never loiter under loads suspended by crane.
Explanation of warning signs and other
symbols
2.6
2,7
Printed: 08.07.2013 | Doc-Nr: PUB / 5069686 / 000 / 01