Hilti DS TS20-E, Руководство по эксплуатации

Страница: 30 / 36

Troubleshooting
Symbol 12 blinks Sr62 Warning of imminent cut-out Cooling water insufficient or – Improve the cooling
rapidly Sr63 due to overheating too warm – Place the power supply in the
shade
Sr64 Ambient temperature too high – Return the saw head to Hilti
(Sr64) Service
Symbol 13 lights Saw blade drive cannot be One or more control knobs or – Return all knobs and switches
switched on switches not in the "0” or to the "0” or neutral position
neutral position and restart
Symbol 13 lights Advance movement doesn’t Longitudinal and plunge – Operate the advance controls
function advance operated individually
simultaneously
Symbol 13 lights Zero position indicator lights The motor brake has been – None required
as the blade is coming to a activated
standstill
Symbol 14 lights Machine cannot be switched The Output Stop switch is in – Release the Output Stop
on the pressed-in position button / restart
– Have the fault repaired by Hilti
Service
Symbol 14 lights Er11 Machine cannot be switched Break in the Output Stop / – Check the motor cable and
on motor cable circuit plug connections
– Return the saw head, motor cable
and power supply to Hilti Service
Symbol 15 blinks Er44 Machine cannot be switched Difference between phases – Check the electric supply
on or switches itself off > 10% – Return the power supply
to Hilti Service
Symbol 15 lights Er42 Machine cannot be switched Electric power is inadequate – Check the electric supply
Er43 on or switches itself off – Return the power supply
to Hilti Service
Symbol 15 blinks Sr45 Warning that electric power is Electric power is inadequate – Check the electric supply
slowly Sr46 inadequate – Return the power supply
to Hilti Service
Symbol 16 lights No fault Service interval has been – Return the saw head to Hilti for
reached servicing
Symbol 18 lights Machine cannot be switched Output Stop reset button – Press the reset button / restart
on hasn’t been pressed
Display Er00 The machine doesn’t function Remote control unit and saw – Check compatibility and
head not compatible with each replace the remote control unit
other with one of the correct type
– Return remote control and
power supply to Hilti Service
Display Er01 The machine doesn’t function Faulty connection between – Check plug connectors and cable
Er02 correctly the remote control and power – Replace the remote control unit
supply – Return remote control and
power supply to Hilti Service
Display Er04 The machine doesn’t function Fault in the remote control – Replace the remote control
Er05 correctly electronics – Return the remote control to
Er06 Hilti Service
Er07
Display Er12 Machine cannot be switched Break in the connection between – Check the control cable and
on the power supply and the saw plug connections
head – Return the saw head, control cable
and power supply to Hilti Service
30
Printed: 08.07.2013 | Doc-Nr: PUB / 5069686 / 000 / 01