Assembly
9.25 inch
(235 mm)
5.47 inch
(139 mm)
5.47 inch
(139 mm)
7.20 inch
(183 mm)
10.79 inch
(274 mm)
9.25 inch
(235 mm)
9.25 inch
(235 mm)
9.05 inch
(230 mm)
max. 20” (50 cm)
max. 66” (170 cm)
max. 40” (100 cm)
17 inch (432 mm)
9.05 inch (230 mm)
14.21 inch (361 mm)
5.47 inch (139 mm)
23.43 inch (595 mm)
29.21 inch (742 mm)
6.93 inch
(176 mm)
6.93 inch
(176 mm)
10.08 inch
(256 mm)
3.15 inch (80 mm)
Anchor hole distance
Main dimensions of the DS TS20-E (in inch / mm)
Maximal permissible rail support distance
Fitting the rail
1. Fit the rail clamp to the rail.
2. Position the rail with fitted rail clamp on the rail sup-
port and close the clamping plate.
3. Turn the rail support until at right angles to the rail and
then tighten the clamping plate securely.
4. Compensate for any difference in level by adjusting
the leveling screws.
5. Align the rail at the correct distance from the cutting
line and then tighten the fastening screws.
6. Fit end stops at both ends of the rail.
-NOTE-
The rail clamps cannot be used with the rail supports for
angular cutting.
4.9
Parts
No.
Designation
Rail
Rail clamp
Rail support
Rail clamping plate
Rail clamping screw
Leveling screws
Clamping plate for stepped cuts
17
Printed: 08.07.2013 | Doc-Nr: PUB / 5069686 / 000 / 01
