Operation
No.
Description
Function
Saw blade drive motor on / off
Starting blade drive: Turn to START (switch returns to
position II when released)
Position II = saw blade drive running
Position I = saw blade drive “Off”
Saw blade speed
Infinite (stepless) speed regulation – display position
.
Direction of advance
Selects direction of advance of the saw on the rail.
Direction of plunge movement
Selects direction of saw blade plunge movement.
Speed regulation for controls 3 and 4
Manual and / or automatic advance or plunge
movement-display position
.
Rapid movement for control 5
For rapid advance and plunge movement when saw
blade drive is switched off.
Cooling water on / off
Controls cooling water supply to saw blade.
Water flows when not under power.
Output Stop switch
Press in an emergency! Leave pressed in when setting
up or changing blades etc.
Turn knob in direction of arrow to release – display
position
.
Reset switch for Output Stop
Reset must be pressed after releasing the Output Stop
switch
– display position
.
Overheating cut-out
Lights when the machine has switched itself off due to
overheating.
Temperature warning
Lights when cooling is inadequate.
Zero position error
Lights when one or more knobs are not in the zero or
neutral position when switching on.
Output Stop indicator
Lights when the Output Stop switch is pressed or
when not reset.
Fault in electric supply
Lights when a phase is missing, voltage is too low or
too high or out of synchronization.
Service indicator
Lights when servicing is due (end of service interval).
Servicing should be carried out by Hilti.
Theft protection
Not active.
Output Stop indicator
Lights when the Output Stop has not been reset –
switch
.
24
Printed: 08.07.2013 | Doc-Nr: PUB / 5069686 / 000 / 01
