Hilti C 53, Руководство пользователя

Страница: 7 / 32

*2302422*
2302422 English 3
▶ The location at which the charger is used should be clean, cool, dry and protected from frost.
▶ The charger must be able to give off heat while charging is in progress. Accordingly, remove the charger
from the toolbox. Do not operate the charger inside a closed container.
▶ Maintain the product carefully. Check to ensure that no parts are broken or damaged in such a way that
the appliance may no longer function correctly. If parts are damaged, have the parts repaired before
using the appliance.
▶ Misuse can result in liquid escaping from the battery. Avoid contact with this liquid. If contact accidentally
occurs, rinse with water. Seek medical attention if the liquid comes into contact with the eyes. Liquid
escaping from the battery can cause skin irritation or burns.
▶ Do not charge or continue to use a damaged welding machine (e.g. with cracks, broken parts, bent or
pushed-in and/or pulled-out contacts).
Service
▶ Have your product repaired only by qualified, skilled personnel, using only genuine Hilti spare parts. The
safety of the product can thus be maintained.
3 Description
3.1 Product overview 1
@
Supply cord
;
Charging cable socket
=
Operating panel
%
Fault indicator (red)
&
Power-in indicator (green)
(
Quick charge button
) Fully-charged indicator (green)
+
Quick charge indicator (green)
§
Charge indicator (green)
/
Charging cord
3.2 Intended use
The product described is a charger for the FX 3-A welding machine. It is designed to be connected to power
outlets providing an AC (alternating current) voltage of 100 to 127 volts or 220 to 240 volts (depending on
country-specific version). Observe the information on the type identification plate of your charger.
• More information is available from your
Hilti Store or from www.hilti.group
3.2.1 Foreseeable misuse
Never try to use the product to charge other batteries or products other than the Hilti FX 3-A.
3.3 Using extension cords
The use of an inappropriate extension cord can lead to risk of fire and electric shock. If the use of an
extension cord is necessary, make sure that
• the pins of the extension cord connector are of the matching number, size and shape to mate with the
connector of the charger,
• the extension cord is correctly wired and in good electrical condition,
• the conductor gauge is adequate for the charger's AC amperage.
3.3.1 Maximum length of an extension cord
AWG 16 AWG 12 AWG 10 AWG 8
7.6 m
(24 ft - 11 in) 15.2 m
(49 ft - 10 in) 30.5 m
(100 ft - 1 in) 45.6 m
(149 ft - 7 in)
3.3.2 Overcharge protection
The product has overcharge protection. When the battery is fully charged the charger automatically switches
to the maintenance mode.