Descriptions and drawings
26/70
2.4.11
X1602 - Connector for NXHX fieldbus adapter modules
Pin header connector
X1602
for NXHX fieldbus adapter modules. For
identifying the connector on the board, see position
(20)
in section
Positions of interfaces and operating elements
You can mount (plug-on) the following modules on this connector:
·
NXHX‑DP
for PROFIBUS (part number: 7923.410)
·
NXHX‑CO
for CAN open (part number: 7923.500)
·
NXHX‑DN
for DeviceNet (part number: 7923.510)
·
NXHX‑CC
for CC-Link (part number: 7923.740)
Note:
Using an NXHX fieldbus adapter module requires the appropriate
fieldbus-specific loadable firmware (LFW) from Hilscher.
X1602
Pin
Signal
1
MMIO44_CAN0_TX
2
MMIO43_CAN0_RX
3
MMIO58_I2S0_SDOUT
4
MMIO57_I2S0_LRCK
5
GND
6
+3V3
7
MMIO59_I2S0_SDIN
8
MMIO60_I2S0_CK
9
MMIO61_I2S0_AUDIO_MCK
10
MMIO14_GPIO0_14
Table 21: Pin Assignment X1602
For the technical details of the NXHX fieldbus adapter modules, see section
NXHX Fieldbus interface adapter modules
NXHX 4000-JTAG+ | Device description
DOC170703HW02EN | Revision 2 | English | 2018-10 | Released | Public
© Hilscher 2018