Descriptions and drawings
25/70
2.4.10
X1601 - Connector for NXHX-RS232 and NXHX fieldbus adapter
modules
Pin header connector
X1601
for the NXHX-RS232 interface adapter
module and the NXHX fieldbus adapter modules. The NXHX-RS232
module can be used as UART interface for Linux. For identifying the
connector on the board, see position
(21)
in section
You can mount (plug-on) the following modules on this connector:
·
NXHX‑RS232
for UART (part number: 7923.010; included in the
delivery of the NXHX 4000-JTAG+ development board)
·
NXHX‑DP
for PROFIBUS (part number: 7923.410)
·
NXHX‑CO
for CAN open (part number: 7923.500)
·
NXHX‑DN
for DeviceNet (part number: 7923.510)
·
NXHX‑CC
for CC-Link (part number: 7923.740)
Note:
Using an NXHX fieldbus adapter module requires the appropriate
fieldbus-specific loadable firmware (LFW) from Hilscher.
X1601
Pin
Signal
1
MMIO31_UART1_TXD
2
MMIO30_UART1_RXD
3
MMIO33_UART1_RTS#
4
MMIO32_UART1_CTS#
5
GND
6
+3V3
7
MMIO20_GPIO1_4
8
MMIO21_GPIO1_5
9
MMIO22_GPIO1_6
10
MMIO23_GPIO1_7
Table 20: Pin Assignment X1601
For the technical details of the
NXHX-RS232
adapter module, see section
NXHX-RS232: Serial interface adapter
For the technical details of the NXHX fieldbus adapter modules, see section
NXHX Fieldbus interface adapter modules
NXHX 4000-JTAG+ | Device description
DOC170703HW02EN | Revision 2 | English | 2018-10 | Released | Public
© Hilscher 2018