Descriptions and drawings
27/70
2.4.12
X1603 – Connector socket for AIFX detached fieldbus interface
modules
Foil connector socket
X1603
for connecting Hilscher AIFX detached
fieldbus interface modules. For identifying the connector on the board, see
position
(23)
in section
Positions of interfaces and operating
You can connect the following AIFX fieldbus modules via flat ribbon cable
to the
X1603
socket:
·
AIFX‑DP
for PROFIBUS DP (part number: 2800.400)
·
AIFX‑CO
for CANopen (part number: 2800.500)
·
AIFX‑DN
for DeviceNet (part number: 2800.510)
·
AIFX‑CC
for CC-Link (part number: 2800.730)
Note:
Using an AIFX fieldbus interface module requires the appropriate
fieldbus-specific loadable firmware (LFW) from Hilscher.
X1603
Pin
Signal
1
GND
2
+3V3
3
MMIO60_I2S0_CK
4
MMIO59_I2S0_SDIN
5
MMIO44_CAN0_TX
6
MMIO43_CAN0_RX
7
MMIO57_I2S0_LRCK
8
MMIO58_I2S0_SDOUT
9
SYS_#RST_OUT
10
MMIO61_I2S0_AUDIO_MCK
Table 22: Pin Assignment X1603
For technical details of the AIFX modules, see section
Important:
When plugging the foil cable into the
X1603
socket, make sure that
the metal contacts at the end of the cable face the metal contacts of
the socket:
NXHX 4000-JTAG+ | Device description
DOC170703HW02EN | Revision 2 | English | 2018-10 | Released | Public
© Hilscher 2018