Accessories
38/70
3.3
NXHX Fieldbus interface adapter modules
3.3.1
Overview
This section describes the NXHX “legacy fieldbus” adapter modules that
can be mounted on connectors
X1600
,
X1601
and
X1602
of the NXHX
4000-JTAG+ board (for identifying the connectors on the board, see section
Positions of interfaces and operating elements
page 12]).
The general layout of the fieldbus adapter modules is as follows:
Fieldbus adapter/interface with duo status LED (Ready/Error).
Figure 6: Fieldbus connector (dimensions in mm)
Pin
Signal
Pin
Signal
1
XMAC TX
6
+3.3V
2
XMAC RX
7
PIO 4
3
XMAC IO 0
8
PIO 5
4
XMAC IO 1
9
RSTOUT
5
GND
10
n.c.
Table 37: Pins of connector to NXHX Fieldbus adapter
NXHX 4000-JTAG+ | Device description
DOC170703HW02EN | Revision 2 | English | 2018-10 | Released | Public
© Hilscher 2018