hilscher CIFX M223090AE Series, Руководство пользователя

Страница: 19 / 55

Installing the hardware 19/55
4.4 Installing the hardware
Install the PC card CIFX M223090AE-RE\F in your PC or connecting
device as described below.
1. Preparation
Note the requirements and prerequisites described in the sections System
Requirements [
}
page 15] and Requirements for operation [
}
page 17].
2. Protective measures and safety precautions
Lethal electrical shock caused by parts with more than
50V!
Ø Disconnect the power plug of the PC or of the connecting device.
Ø
Make sure, that the power supply is off at the PC or at the connecting
device.
Personal injury, device damage due to hot-plug/hot-swap
Ø
Do not "plug" or "unplug" the PC card during operation.
Adhere to the necessary safety precautions for
components that are vulnerable with electrostatic discharge.
Ø
Make sure, that the device is grounded via the endplate and the PC and
make sure, that you are discharged when you install/uninstall the
device.
Device damage due to over torquing of the mounting
screw
Ø
Do not over torque the screw used to mount the basic card to the board
to prevent damage to the printed circuit board.
3. Installation
Ø
Open the housing of the PC or connecting device.
Ø Insert the base card into the PCI Express slot.
Ø
Screw the basic card onto the board. Use the half-moon cutout hole at
the upper edge of the basic card. The ground contact via the screw
head must be guaranteed.
Ø
First attach the detached network interface Ethernet AIFX-V2-RE to the
housing panel of the PC or connecting device.
Ø Then connect the detached network interface Ethernet AIFX-V2-RE to
the basic card.
CIFX M223090AE Real-Time Ethernet | Hardware description and installation
DOC190704UM02EN | Revision 2 | English | 2020-06 | Released | Public © Hilscher 2020